Specification for Moving Floor Transfer Trailer:

AR Constructed Rugged Duty Transfer Trailer

• Long Life Semi-Elliptical Wall Construction
• 1/8" AR 500 Steel fully welded
• 6"x 6" Reinforced Top Wall Beam c/w Aerodynamic one piece Flared Posts
• 14" Steel I-Beam understructure rails c/w 4" I-Beam Cross Members

Medium Duty Transfer Trailers

• Semi-Elliptical Wall Construction
• 14 gauge - 80,000 psi steel, fully welded
• 6"x 6" Reinforced Top Wall Beam c/w Aerodynamic one piece Flared Posts
• 14" Steel I - Beam understructure rails c/w 4" I-Beam Cross Members

Light Duty Frameless Transfer Trailer

• Semi-Elliptical Wall Construction
• 14 gauge - 80,000 psi steel, fully welded
• 6"x 4" Reinforced Top Wall Beam c/w aerodynamic one piece flared posts
• Rear Suspension & Moving Floor support subframe c/w 4" I-Beam cross Members

Compaction Features

• Solid fixed A/R constructed roof
• 2 Piece Tailgate
• 3" diameter Center Pin hook-up
• Side grab hook-up (optional to center pin)

Dimensions

• Overall Length - 48 ft.
• Overall Width - 102"
• Overall Height - 13' 6"
• Capacity - 120 cubic yards

Features Included on all Moving Floor Transfer Trailers:

• Single Piece Tailgate- Single Sheet Curved Construction c/w safety chains
  • Heavy duty hinges - mounted passenger side
  • UHE internal over center locking mechanism - mounted driver's side
• Keith RFII Walking Floor - 3-1/2" HD cylinder c/w 1914 3 _" floor slats
  • Includes service screens under front of trailer, front deflector,
  • 24" wear strips and driver's side direction and neutral controls
• Top Cross Beams - Removable Arched Center and Fixed Rear Crossbeam (Open Top only)
• Inside and Outside Front Wall roadside mounted Ladder
  • Tailgate mounted ladder - in centre
• Dana D22 Axles - 5/8" Wall, 77.5" track c/w cam enclosures,
  • Dustshields, and CR seals
  • Koyo bearing sizes HM212049, HM218248
• Tires - Goodyear G114, 11R22.5 PR 14 Tubeless Radials
• Rims - 22.5 x 8.25 Open Centre
• Hubs - 6 Spoke Cast Hub and Drum (outboard drums with hub pilot setup)
• Midland Grau Air Brake System
  • 16-1/2" x 7" Brakepro CM 18 non asbestos brake linings
  • Q-Type brake shoes
  • Anchorlok 30-30 spring brakes
  • Haldex auto slack adjusters
• HD 1/2" King Pin Plate c/w Holland SAE 2" King Pin - 49" mounting height
• Holland Mark V, 180,000 lb Capacity
  • Two Speed Manual Crank On Driver's Side
• Front wall mounted 7-way ATA Receptacle c/w air connections
• Grote Ultra Blue Lights and Wiring with Circuit Protection,
  • equipped with intermediate side turn signals
• Hydraulic Quick Disconnects - 1" Aeroquip 5600 Series
  • Pressure - Male; Return - Female
• Mudflaps - 1 Pair, mounted behind rearmost axle
• Heavy Duty Rear Bumper With Tow Hooks and Light Protection Screens
• Trailer Sandblasted, Primed and Painted One Colour Polyurethane
• Document holder - On Front Wall Drivers Side
• Conspicuity Treatment - Installed in accordance with FMVSS-108

Learn about options available or request a quotation.

Contact us for more details by phone or with our interactive reply form.

Universal... truly the Universal Choice!